
Full strip-out & anti-fungal sanitary silicone along grey stone shower tray
Quick Trade Answer
Black mould rarely starts inside good silicone. It grows on soap residue, hard-water scale, and damp gaps caused by sealing over old silicone or leaving flat, water-trapping beads. Once mould roots behind the bead, only a 100% strip-out, solvent degrease, and fresh anti-fungal sanitary silicone solves it.
Why bleach and mould sprays are only a temporary fix
When black spots appear along a shower tray or bath rim, most homeowners reach for bleach or thick mould-killer gel. That bleaches the dark pigment on the surface, but it does not remove the damp gap or the dead spores sitting behind the edge of the silicone.
Worse, harsh chlorine bleach slowly breaks down the surface of cheap silicone and washes out its anti-fungal additives, making the bead porous so mould comes back faster every few weeks.
- Flat or concave-lipped beads trap standing water after every shower
- Soap film and hard-water limescale give airborne mould spores something to feed on
- New silicone applied over old silicone traps active damp underneath and peels within months
Comparing a quick patch vs. a proper trade reseal
The biggest difference in lifespan comes down to preparation and bead geometry, not just the tube on the shelf:
| Approach | Preparation | Expected Lifespan | Result |
|---|---|---|---|
| Capping Over Old Sealant | Wiped over & smeared on top | 2 to 6 months | Mould bleeds back through; hidden leaks |
| DIY Hardware Tube | Partial scrape, no solvent prep | 6 to 18 months | Shrinks, yellows, lifts at tray corners |
| Full Strip-Out & Trade Reseal | 100% cut back to bare tile, solvent prepped, bone dry | 5 to 10 years with basic care | Watertight, shed-profile bead, 2-year guarantee |
Three simple habits that keep fresh silicone clean
Once the old sealant is stripped out and a smooth, tight 45-degree bead is tooled so water sheds straight into the tray, maintenance takes seconds:
- Run a quick squeegee or microfibre cloth along the tray ledge after the last shower of the day
- Use pH-neutral bathroom cleaners instead of abrasive creams or neat bleach
- Run the extractor fan or crack the window for 15 minutes after hot showers to drop humidity